News Detail

Circuit breaker switches are important in the power industry as they play a vital role in controlling and protecting electrical equipment. LW8-40.5 outdoor high-voltage SF6 circuit breaker is one of the commonly used circuit breaker switches in the control of power transmission and distribution systems. The circuit breaker switch design complies with national and international standards to ensure safety and effectiveness. In this article, we will deeply discuss the use environment and precautions of the LW8-40.5 outdoor high-voltage SF6 circuit breaker.

First of all, the LW8-40.5 outdoor high voltage SF6 circuit breaker is designed for a maximum altitude of 3000 meters and a humidity of 90% per month. Therefore, special care should be taken when using circuit breaker switches at high altitudes. The circuit breaker switch can handle a maximum wind speed of 35m/s and a class IV pollution degree. It can withstand ambient air temperatures from -35°C to 40°C and can also safely operate in severe cold regions as low as -40°C.

Secondly, it should be noted that the LW8-40.5 outdoor high-voltage SF6 circuit breaker is equipped with a CT14 spring operating mechanism. The mechanism is reliable, ensuring that the circuit breaker switch effectively protects equipment and control circuits. It meets the requirements of national standard GB1984-89 "AC High Voltage Circuit Breaker" and "High Voltage AC Circuit Breaker" published by the International Electrotechnical Commission standard IEC56.

Third, the precautions for using the LW8-40.5 outdoor high-voltage SF6 circuit breaker are very important. During installation and use, be sure to ensure that the circuit breaker switch does not come into contact with water or moisture, otherwise it will cause malfunction or short circuit. The circuit breaker switch should also be kept in an environment free from direct sunlight or extreme weather conditions to optimize its performance.

Fourth, when using the circuit breaker switch, you need to pay attention to the maximum solar radiation of 1000W/m2. This means that the circuit breaker switch should not be exposed to direct sunlight for extended periods of time, as this may cause the unit to overheat and be damaged. Also, if there is no more than 10 mm of ice on the circuit breaker switch, it should be removed immediately to avoid potential damage or injury.

Finally, it is essential to understand that the LW8-40.5 Outdoor High Voltage SF6 Circuit Breaker is designed to operate effectively and efficiently in areas with an earthquake density of 9 degrees. This ensures that the circuit breaker switching is stable and not susceptible to earthquakes or any other strong seismic activity.

To sum up, LW8-40.5 outdoor high-voltage SF6 circuit breaker is an important circuit breaker switch for power transmission and distribution system control. Its CT14 spring operating mechanism ensures that the circuit breaker switch can effectively protect equipment and control circuits. It is important to take precautions and understand the environment of use to optimize the performance of the circuit breaker switch. By taking these measures, you can ensure the long-term reliable and safe operation of the circuit breaker switch.

断路器开关
断路器开关1

Post time: May-08-2023