Product Center

GW9-12 outdoor 10kV pole mounted knife switch disconnector

Short Description:


Product Detail

Product Tags

LSOLATING SWITCH

GW9-12 series isolating switch is single-use for three-phase line system, simple in structure, economical and easy to use;

This product is a single-break vertical open structure, and the single-stage isolating switch post insulators are installed on their respective chassis, mainly composed of base, post insulator, main conductive circuit part, self-locking device, etc.

The guillotine structure is used to switch on and off to cut off and close the circuit. Each phase of the knife is composed of two conductive blades, and the two sides of the blade are equipped with compression springs, and the contact pressure required by the switch knife can be obtained by adjusting the height of the spring. When the switch is opened and closed, an insulating hook rod is used to operate the mechanism part, and the knife has a self-locking device.

(H) Gw9-10 outdoor high-voltage disconnector is a single-phase AC 50Hz high-voltage switchgear, which is used to connect or isolate the power supply under the condition of voltage and no load in the power system with rated current less than 10kV.

The disconnector is operated with an insulating rod.

For more information about GW9-12 disconnect switch, please contact us.

TECHNICAL PARAMETER

Parameter
GW9-12 old type / GW9-15 new
HGW9-12 old type / HGW9-15 new
Parameter

 

Parameter name Unit   Parameter value
Rated voltage kv 12
Maximum operating voltage kV 12
Rated frequency Hz 50/60
2S thermal stability current KA (effective value) A 200 400 630
Dynamic stability current KA (effective value) kA 6.3 12.5 20
Rated lightning impulse withstand voltage Relatively kV 105
Between fractures kV 120
Rated 1min power frequency withstand voltage Relatively kV 40
Between fractures kV 47
Creepage distance mm 300
Mechanical life N 2000
GW9-12 old type / GW9-15 new

GW9-12-old-type-01GW9-15-NEW

GW9-12 OLD TYPE
Type Rated voltage (kv) Rated current (A) Limit passing current (KA) 10s Heat steady current
Peak RMS
GW9-12W/200 12 200 5 9 5
GW9-15W/400 12 400 21 15 10
GW9-15W/400 12 630 35 25 14

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

GW9-12 NEW
Type Rated voltage (kv) Rated current (A) Limit passing current (KA) 10s Heat steady current
Peak RMS
GW9-15W/200 15 200 5 9 5
GW9-15W/400 15 400 21 15 10
GW9-15W/630 15 630 35 25 14
HGW9-12 old type / HGW9-15 new

HGW9-12-old-type HGW9-15-NEW

HGW9-12 OLD TYPE
Type Rated voltage (kv) Rated current (A) Limit passing current (KA) 10s Heat steady current
Peak RMS
HGW9-12W/200 12 200 5 9 5
HGW9-15W/400 12 400 21 15 10
HGW9-15W/630 12 630 35 25 14

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

HGW9-15 NEW
Type Rated voltage (kv) Rated current (A) Limit passing  current (KA) 10s Heat steady  current
Peak RMS
HGW9-15W/200 15 200 5 9 5
HGW9-15W/400 15 400 21 15 10
HGW9-15W/630 15 630 35 25 14

PELATED PRODUCTS

PRODUCT DETAILS

>>   Action principle                                                                                                                                                        / 运动原理
>>   Hidden danger                                                                                                                                                         / 安全隐患
>>   Installation scenario                                                                                                                                                / 安装场景
>>   Product characteristics                                                                                                                                           / 产品特性
>>   Service conditions                                                                                                                                                   / 使用条件
>>   Why choose us                                                                                                                                                        / 为什么选择我们

>> GW9-12 Disconnector

GW9-12-details-01
function

Safety  protection   //  Corrosion resistance  //  Outdoor  rainproof  //  Long life  //  Excellent material

>> Action principle

When the disconnector is opened and closed, it is operated with an insulating hook rod. The insulating hook rod fastens the lock hook of the disconnector and pulls the lock hook to the opening direction. After unlocking the self-locking device, it drives the connected conductive plate to rotate to realize the opening action. When closing, the insulating hook rod butts the lock hook of the disconnector and drives the rotating shaft to select and install, so that the connected conductive plate rotates to the closing position. At this time, the self-locking device locks the disconnector in the closing device.
This type of disconnector can be installed on the pillar, wall, ceiling, horizontal frame or metal frame, and can also be installed vertically or obliquely, but the installation position should make the contact knife tend downward when it is opened.

>> Hidden danger

The use of inferior disconnector will lead to porcelain bottle fracture fault and overheating of conductive circuit. During operation, the spring will be compressed for a long time due to static contact finger compression.
If the working current is large and the temperature rise exceeds the allowable value, its elasticity will deteriorate and a vicious circle will eventually cause burning loss and endanger life safety!

GW9-12-hidden danger

>> Installation scenario

Hydropower station                                                                                                                                                                                #1
Factory and mining enterprises                                                                                                                                                            #2
Ring network power supply                                                                                                                                                                   #3
Petrochemical Enterprises                                                                                                                                                                     #4

>> Product characteristics

01.Exquisite material safety protection                                                                                                                                            ......./03
02.Silver Plated Red Copper isolating knife switch                                                                                                                         ......./03
03.High performance and long life                                                                                                                                                    ......./03

>> Service conditions

Service-conditions

1. Normal use conditions: the altitude shall not exceed 1000m;
2. Ambient air temperature: upper limit + 40 ℃, lower line general area - 30 ℃, alpine area - 40 ℃;
3. The wind pressure shall not exceed 700pa The seismic intensity shall not exceed 8 degrees;
4. Places without frequent and violent vibration;
5. The ordinary installation site shall be free of gas, vapor, chemical deposition, salt mist, dust and other explosive and corrosive characteristics that seriously affect the insulation and conductivity of the disconnector;
6. Antifouling type is applicable to heavily polluted areas, but there shall be no fire and explosive substances.

>> Why choose us

DESIGN SERVICES

Packaging design and improved product mix have a history of more than 20 years. It is the most important to establish and maintain the unique characteristics and style of products

PRODUCT SAMPLING

Mass production can only start after you approve it

DEVELOPMENT

New product development, different market characteristics and commitment to international trade facilitation, credibility and transparency

AFTER-SALE SERVICE

Customer feedback, actively looking for solutions to problems, professional technical guidance and long-term after-sales service

奖状

COMPANY INTRODUCTION

公司图片
Company profile

       Lawrence Electric Co., Ltd. is a high-tech enterprise focusing on power transmission and distribution products, providing customers with one-stop service of power transmission and distribution products.

        It mainly produces and sells lightning arrester, insulator, fuse, isolation / load switch, SF6 / vacuum circuit breaker, power supply fittings, optical cable fittings, switch cabinet and other transmission and distribution products. The company has production bases and sales centers in Jiangxi, Zhejiang, Uganda, Tanzania and other places.

Nature of Business

        Our products have operated safely in the power supply systems of more than 20 countries and regions around the world for more than 10 years. They are also qualified suppliers of China State Grid and China Southern Power Grid. At present, they have gained a good reputation in the field of power system in the world.

world

        We have received high-quality product recommendation letters from power supply companies in Kenya, Uganda, Tanzania, Zambia, Guinea, Ghana, Togo, Mozambique, Nepal, Guyana, Myanmar and other countries and regions.

Real shooting factory

factory

Conformity inspection

test

Ehibition

xhibition

22

------------------------------------------------------------

企业愿景:成为全球输配电集成供应商
OUR VISION: ONE STOP SERVICE FOR THE GLOBAL DISTRIBUTION AND SUBSTATION ELECTRICAL MATERIALS.
企业价值观:以卓越品质立企业之本,以优质服务得民众之心。
OUR VALUE: SUPERIOR QUALITY BUILDS THE FOUNDATION, EFFICIENT SERVICE WINS CUSTOMER’S CREDIT.
企业精神:团队协作,勇于开拓,持之以恒,共创辉煌。
OUR SPIRIT: FOCUS ON TEAMWORK AND COLLABORATION
BRAVE IN EXPLORATION AND CREATIVITY
NEVER GIVE UP ON ANY COMPANY PERSONNEL
TO CREATE A BRILLIANT TOMORROW TOGETHER
员工行为:倾听,微笑,赞美,坚守承诺,感恩。
CONDUCT CODE: LISTEN, SMILE, PRAISE, APPRECIATE
企业责任:为客户创造价值,为员工创造美好生活,为社会做出应有贡献。
OUR RESPONSIBILITY: MAXIMIZE CUSTOMER’S PROFIT, CREATE GREAT CONDITION FOR STAFF,
MAKE CONTRIBUTIONS TO THE WHOLE WORLD !。

PACKAGING AND TRANSPORTATION

Packaging-and-transportation

SHOPPING INSTRUCIONS

Warranty

We are aware of the quality assurance. If you have any question, please contact the customer service, so as to ensure that you can use them and solve your worries.

About Delivery

The production cycle is generally 10 to 30 working days depending on the product. In case any urgent materials please contanct with us for fast delivery.


  • Previous:
  • Next:

  • Write your message here and send it to us